An out-of-service well doesn’t simply disappear. Depending on its status, it may need to be inspected and kept safe, permanently closed, or assessed for another approved use. In Alberta, one possibility is repurposing a suitable well to provide geothermal heat for a nearby greenhouse or community heating network.
For greenhouse growers, the idea is practical: use heat from below ground to support growing through Alberta’s cold months. It could also offer a hedge against future energy price swings. However, geothermal heat is not a guaranteed cheaper option than current natural gas prices. A project must be tested against the grower’s needs, site conditions, and costs.
First, what does “out of service” mean?
People often use “inactive,” “abandoned,” and “orphan” as if they mean the same thing. They do not.
An inactive well has stopped producing or serving its previous purpose. It may still have a responsible licensee and may be reactivated. Alberta’s rules require certain wells to be suspended and managed, rather than simply left unattended.
An abandoned well has been permanently closed. The well is plugged, cut, and capped. The site may then go through further closure work, including removal of infrastructure, environmental assessment, cleanup if required, and land reclamation.
An orphan well is a well or site with no legally or financially responsible party able to complete its closure duties. That status does not mean the well is ready for a new use.
So, an out-of-service well is not automatically available for geothermal development. First, the well’s status, ownership, condition, and surface access must be confirmed. The Alberta Energy Regulator explains the reclamation process for oil and gas sites.

How could an old well provide greenhouse heat?
Geothermal energy is heat from below Earth’s surface. In a closed-loop system, a separate fluid circulates through equipment installed in a well. It absorbs heat underground, then carries that heat to surface equipment. The fluid stays within the loop; it does not bring formation water to the greenhouse.
At the surface, heat exchangers can transfer the warmth to a greenhouse heating system. Depending on the well and the required temperatures, a heat pump could help raise the heat to a useful level. The system would need to match the greenhouse’s heating design and operating schedule.
The Alberta Energy Regulator’s overview of geothermal development describes both open- and closed-loop systems. It also identifies greenhouses and district heating among possible uses for geothermal heat.
However, not every well is a good candidate. A technical review would need to consider:
- The well’s depth, temperature, and construction records.
- The casing and cement condition, plus any needed repairs.
- The amount and temperature of heat the well could deliver over time.
- The greenhouse’s heat demand, including seasonal peaks.
- The distance between the well and the heat user.
- Surface access, approvals, ownership, and project costs.
As a result, a nearby well with a suitable heat profile may be more useful than a deeper well far from customers. A good prospect on paper still needs inspection and testing.
Why growers might consider geothermal heat
Greenhouse production depends on reliable heat. A geothermal system could provide a steady source that helps reduce exposure to future swings in fuel prices. That makes it a possible energy-security measure, not a promise of immediate savings.
The business case would depend on the full system. A grower would need to compare installation, operation, backup heat, and maintenance costs with the value of more stable heat over time. Therefore, early feasibility work should use the greenhouse’s real energy data, rather than assume a standard design will fit every operation.
Geothermal heat could also support local food production. If a project proves workable, more predictable heat may help growers plan production and preserve meaningful agricultural work in rural communities. In turn, locally grown vegetables could support food supply resilience and bring fresh produce closer to consumers.

A shared heat network could serve more than one customer
A suitable well may have potential beyond a single greenhouse. For example, several greenhouses or nearby buildings could share heat through a district heating system. That approach could spread some infrastructure costs across more than one user.
The Netherlands provides a useful reference for the heat-use side of the idea. Its greenhouse sector includes examples of growers sharing geothermal heat through networks. This is a benchmark for coordinating heat customers, not proof that repurposed oil wells already supply those greenhouses. See the AIPH report on geothermal heat in Dutch greenhouse production.
Meanwhile, research at the University of Calgary’s GeoEnergi Centre examines the technical and economic potential of closed-loop systems in Alberta. The researchers note that performance depends on well conditions and heat-transfer limits. Consequently, local testing and a clear customer need matter as much as the basic concept.
What would it take to move from idea to project?
Repurposing inactive oil and gas wells for geothermal heat requires careful steps. It does not replace the rules for safe well management or eventual closure. Instead, it would need an approved plan, a responsible operator, and a clear path through the well’s full lifecycle.
A practical development path could include:
- Confirm well status and responsibility. Review regulator records, licensee information, land access, and any closure obligations.
- Screen and inspect candidate wells. Assess well records, integrity, expected heat, and the need for repair or further testing.
- Match heat supply with demand. Compare the well’s potential output with a greenhouse’s heating profile and its distance from the site.
- Complete feasibility and approval work. Develop the design, costs, operating plan, environmental safeguards, and required applications.
- Test performance with a customer. A pilot could measure actual heat delivery and operating needs before wider development.
Alberta’s geothermal framework places deep geothermal development under provincial oversight. The Government of Alberta’s geothermal resource page outlines the framework and recognizes repurposing inactive oil and gas infrastructure as a potential opportunity. In addition, the AER sets out requirements for geothermal wells, facilities, and heat distribution infrastructure.

Alberta’s next step: prove the idea carefully
Algar Geothermal is working toward a pre-commercial southern Alberta pilot planned for 2026. The pilot remains subject to federal and provincial funding, well access, and industry commitments. No active Algar geothermal heat projects are operating yet.
A pilot could help answer the questions growers need answered: How much heat can a selected well provide? What equipment would the greenhouse need? How would the project manage seasonal demand and backup heat? And can a local heat customer make the economics work?
For growers, oil and gas companies, governments, and rural communities, that is the value of a demonstration. It could build evidence, support local skilled work, and show where existing infrastructure may serve a new purpose. However, every site would still need its own technical, regulatory, and commercial review.
The idea is straightforward, even if the work is not: assess the well, match it to a heat customer, and test the system before making bigger promises. For Alberta growers, would a reliable local heat source help strengthen your plans for the years ahead?
Learn more about Algar Geothermal and our southern Alberta greenhouse heating vision.
